Products

*There is a slight line going across these grips due to a laser engraver hiccup.   Ruger Mark IV  Grips will ONLY fit the Standard Ruger Mark 4. Gr...

*No flaws or defects* These grips were made for a photography shoot. They are wood types and a design combination that we do not offer from our sto...

*The design on these grips is altered from our traditional Floral Checkered design.   1911 Full Size Grips will fit any standard full size, single ...

*The design on these grips is altered from our standard design.   Ruger Super Blackhawk Knowing what grips you need for a Ruger single action can b...

*The design on these grips is altered from our standard design.   Ruger Birdshead Knowing what grips you need for a Ruger single action can be diff...

*No Flaws or Defects* These grips were made as a trial for our Custom 1911 Grip Designer. This wood type and design combo is not available from our...

*No flaws or defects* These grips were made for a photography shoot. They are wood types and a design combination that we do not offer from our sto...

Ruger Bisley Knowing what grips you need for a Ruger single action can be difficult. Ruger has 5 single action grip frames currently in production,...

Machined Texture These grips are not Ambidextrous Cut. If you would like them to be Ambi Cut please contact us or leave a note at check out to let...

Machined Texture These grips are not Ambidextrous Cut. If you would like them to be Ambi Cut please contact us or leave a note at check out to let...

Small defect as shown in the second photo but no other issues with the grips. These are full size Coonan grips and will not fit the compact Cadet...

The defect is that the engraving had a glitch and left a line in the engraving. No other issues with the grips. Ruger Birdshead Knowing what grip...

Machined Texture These grips are not Ambidextrous Cut. If you would like them to be Ambi Cut please contact us or leave a note at check out to let...

1911 Full Size Grips will fit any standard full size, single stack 1911. The last photos show the measurements for hole spacing (3-1/16” or 3.07”) ...

*There is a tiny knot in the wood on one of the grips. This does not effect fit or performance.    Ruger Vaquero/Blackhawk Knowing what grips you n...

*There is a small knot line in the wood on the left side grip. This does not effect performance or fit.  CZ-75 Grips will fit CZ-75, CZ SP01, CZ-75...

*There are inconsistencies within the grain pattern on these grips. This does not effect fit or performance.   Ruger Vaquero/Blackhawk Knowing what...

*These are magwell cut.   1911 Full Size Grips will fit any standard full size, single stack 1911. The last photos show the measurements for hole s...

1911 Compact Grips will fit any standard COMPACT, single stack 1911. The last photos show the measurements for hole spacing (2-1/16” or 2.68”) on s...

Machined Texture Last photos show the measurements for hole spacing on standard 1911 frames and explains what an ambidextrous cut is and should h...

These are Beretta 92x grips. Polyester Composite Pearl Grips. If you don't see what you’re looking for please refer to our Pearl Scales to see all ...

1911 Compact Grips will fit any standard COMPACT, single stack 1911. The last photos show the measurements for hole spacing (2-1/16” or 2.68”) on s...

*There is a tiny ding in the wood of one grip. See photos.    Beretta 92X Grips will fit the Beretta 92X, M9A3, and M9A4. Grips will NOT fit Berett...

*These grips have an engraving that is slightly shifted over. This does not effect fit or performance. Colt Mustang Pocketlite Grips will only fit ...

***Chip on the bottom of grip as shown in the second photo. No other issues with the grips.*** Sig Sauer P238 Grips will ONLY fit the Sig Sauer P23...

1911 Full Size Grips will fit any standard full size, single stack 1911. The last photos show the measurements for hole spacing (3-1/16” or 3.07”) ...

1911 Full Size Grips will fit any standard full size, single stack 1911. The last photos show the measurements for hole spacing (3-1/16” or 3.07”) ...

1911 Compact Grips will fit any standard COMPACT, single stack 1911. The last photos show the measurements for hole spacing (2-1/16” or 2.68”) on s...

1911 Full Size Grips will fit any standard full size, single stack 1911. The last photos show the measurements for hole spacing (3-1/16” or 3.07”) ...

Terrazzo Pearl Scales Scales (2 Pieces); 5 1/4" Long, 1 3/4" Wide, 3/8" Thick. Half Sheet; 7 3/8" Long, 5 1/4" Wide, 3/8" Thick. Full Sheet; 10 7/8...

Polyester Composite Pearl Scales   Scales (2 Pieces); 5 1/4" Long, 1 3/4" Wide, 3/8" Thick. Half Sheet; 7 3/8" Long, 5 1/4" Wide, 3/8" Thick. Full ...

Polyester Composite Pearl Scales   Scales (2 Pieces); 5 1/4" Long, 1 3/4" Wide, 3/8" Thick. Half Sheet; 7 3/8" Long, 5 1/4" Wide, 3/8" Thick. Full ...

Terrazzo Pearl Scales Scales (2 Pieces); 5 1/4" Long, 1 3/4" Wide, 3/8" Thick. Half Sheet; 7 3/8" Long, 5 1/4" Wide, 3/8" Thick. Full Sheet; 10 7/8...

Terrazzo Pearl Scales Scales (2 Pieces); 5 1/4" Long, 1 3/4" Wide, 3/8" Thick. Half Sheet; 7 3/8" Long, 5 1/4" Wide, 3/8" Thick. Full Sheet; 10 7/8...

Polyester Composite Scales   Scales (2 Pieces); 5 1/4" Long, 1 3/4" Wide, 3/8" Thick. Half Sheet; 7 3/8" Long, 5 1/4" Wide, 3/8" Thick. Full Sheet;...

Polyester Composite Pearl Scales   Scales (2 Pieces); 5 1/4" Long, 1 3/4" Wide, 3/8" Thick. Half Sheet; 7 3/8" Long, 5 1/4" Wide, 3/8" Thick. Full ...

Polyester Composite Pearl Scales   Scales (2 Pieces); 5 1/4" Long, 1 3/4" Wide, 3/8" Thick. Half Sheet; 7 3/8" Long, 5 1/4" Wide, 3/8" Thick. Full ...

1911 Compact Grips will fit any standard COMPACT, single stack 1911. The last photos show the measurements for hole spacing (2-1/16” or 2.68”) on s...

1911 Full Size Grips will fit any standard full size, single stack 1911. The last photos show the measurements for hole spacing (3-1/16” or 3.07”) ...

Beretta 92fs Grips will fit Beretta 92FS, 92F, 92G, M9, M9A1, and Girsan Regard MC 9mm. Will NOT fit Beretta 92X, M9A3, M9A4, or the Taurus PT92. S...

Beretta 92X Grips will fit the Beretta 92X, M9A3, and M9A4. Grips will NOT fit Beretta 92FS, 92F, 92G, M9, M9A1, or Beretta 92X Performance. Stock ...

Colt Mustang Pocketlite Grips will only fit a Colt Mustang Pocketlite. These grips will NOT fit the mustang government, or MKIV series. If your gun...

Coonan .357 Grips will ONLY fit a full-size Coonan .357, original or new model. These grips will not fit on the Coonan compact (cadet model). Stock...

Coonan Compact .357 Grips will ONLY fit a Coonan Compact (Cadet) .357. These grips will not fit on the Standard full-size Coonan .357. Stock Photos...

CZ-75 Grips will fit CZ-75, CZ SP01, CZ-75B, CZ Shadow, Tristar 120, CZ-85, and Canik CZ-75 Clones. These grips will NOT fit the CZ Compact. Stock ...

Bond Arms Derringer Stock Photos; exact pattern may vary. Custom Bond Arms Derringer grips are also available. Please contact us via our Contact pa...

Browning 1911 22/380  Grips will ONLY fit a Browning 1911 .22lr or .380 acp. These will NOT fit on any standard 1911 frame. Stock Photos; exact pa...

Heritage Rough Rider Grips will ONLY fit Standard Heritage Rough Rider frames, will NOT fit any other make and model single action. Stock Photos; e...